Accendo Electronics' Blog

-> DHID Electrical Test Reports

Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
 
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.
Accendo Electronics GloGreen Series 575W/600W/750W/1000W Digital HID (DHID) Light Ballast
   
 
 
Accendo Digital HID (DHID) Ballast Test Reports

A test report is prepared and shipped with your order; please keep the report for your records, and please do not hesitate to contact us should you have any questions on the results:
 


DHID Lighting is Application Flexible 

One lighting solution can now solve a multitude of applications where quality, long lasting light penetration is essential. By simply retrofitting/upgrading the old core and coil (magnetic) ballast in an existing High-Intensity Discharge lamp system, the application benefits immediately with 40%-50% savings in electrical energy consumption. 

Economically and environmentally responsible, the GloGreen Series lighting retrofit or upgrade solution is the only to meet all of your indoor and outdoor lighting needs with cost-effective, longer lasting light that will not degrade over time. With DHID lighting products in 50W to 1000W configurations, Accendo is your true one-source lighting solution partner. 

   

Where Are GloGreen DHID Lighting Retrofit Ballasts Applied?
 
  • GloGreen 50W DHID ballast replaces core and coil (magnetic) 70W- 100W ballast – application examples include underground parking, lowbay factory/warehouse (<15ft), street lighting, outdoor parking lot lighting, wallpack/building perimeter lighting, decorative lighting, canopy lighting.
  • GloGreen 70W DHID ballast replaces core and coil (magnetic) 100W- 150W ballast – application examples include underground parking, lowbay factory/warehouse (<25ft), street lighting, outdoor parking lot lighting, wallpack/building perimeter lighting, canopy lighting.
  • GloGreen 100W or 150W replaces magnetic 150W-360W – application examples include highbay factory/warehouse/retail (<30ft), street/parking lot lighting, general outdoor/indoor applications.
  • GloGreen 200W or 250W replaces magnetic 250W-450W – applications include highbay factory/warehouse/retail (<50ft) , street lighting, arena, event, airport, hydroponics, aquarium, general outdoor/indoor applications.
  • GloGreen 400W or 575W or 600W or 750W replaces magnetic 575W-1500W – applications include highbay factory/warehouse/retail (50ft+), street/highway/parking lot lighting, arena/stadium, sports field, event, airport, hydroponics, greenhouse, aquarium, any general outdoor/indoor lighting applications requiring really long light throw/penetration.
  • GloGreen 1000W replaces magnetic 1500W-2000W – applications include highbay factory/warehouse/retail (100ft+), street/highway/parking lot lighting, arena/stadium, sports field, event, airport, hydroponics, greenhouse, aquarium, any general outdoor/indoor lighting applications requiring extremely long light throw/penetration.
  • GloGreen S DHID products are designed to work most efficiently with solar/wind power sources.

  

The DHID ballast offers a very high electrical efficiency, converting the most Watts that are input into lumens output to the target (highest lumens per Watt ratio on market). The above substitutions yield instant 40%-50% or more savings in energy consumption; if dimming is utilized, the savings can equate to 75%+. The Digital HID ballast lighting solution is the only on the market to operate both MH and HPS bulbs with equal efficiency. Each GloGreen Series DHID ballast is fully silicon potted; completely sealed for harsh manufacturing environment or outdoor applications. 

With the World’s shortest ‘realistic’ return on investment time, the GloGreen Series Digital HID lighting solution truly is free, it is only a matter of time. Please do not hesitate to contact us today to learn more about your energy and money saving opportunity. We look forward to the honour of partnering with you in your environmental and energy cost reduction initiatives. 

Anthony Borges
aborges@accendoelectronics.com
www.AccendoElectronics.com
www.AccendoElectronics.WordPress.com

 

One Response

Subscribe to comments with RSS.

  1. Dimming HID Lamps Saves Industry Energy and Money « Accendo Electronics' Blog said, on September 15, 2010 at 2:38 pm

    [...] Updated Test Reports for GloGreen Digital HID 50W to 1000W downloadable here: -> DHID Electrical Test Reports [...]

    Reply

Leave a Reply

Fill in your details below or click an icon to log in:

Gravatar
WordPress.com Logo

You are commenting using your WordPress.com account. ( Log Out / Change )

Twitter picture

You are commenting using your Twitter account. ( Log Out / Change )

Facebook photo

You are commenting using your Facebook account. ( Log Out / Change )

Cancel

Connecting to %s

Follow

Get every new post delivered to your Inbox.